Type C to DC5.5×2.1mm Power Adapter Cord 5-20V Adjustable Voltage PD Fast Charging Cable for Lenovo Asus Hp Acer Laptop and More

The USB to DC5521 cable can be applied to many 5V power supplies, the most common being mobile power supplies.
The adapter can provide comprehensive protection for your device, preventing overvoltage.
overcurrent, overload, or short circuit.Output adjustable PD fast charging 5V9V12V15V20V, capable of carrying 3A current
The PD output device needs to support 36W/45W/65W/90W/100W.
Cables can be used for laptop ,  laptop heat dissipation pads, speakers, wireless routers, fans, tablets, IP cameras, electric , LED lights, , USB hubs, portable projectors, portable recorders, and more.

Specifications:
Item: Usb C to DC PD Converter Cable
USB C onnector: Usb C Male
DC Cnnetors : DC 5.5×2.1mm Male
Activation : 5V9V12V15V20V Adjustable
Cable Length：Approx 120CM/3.94ft
PD Output Device Needs To Support 36W/45W/65W/90W/100W

Note:

The USB C to DC decoy cable must be used with a charger or mobile power supply that supports one of the PD protocols, otherwise it can only output 5V.

Before purchasing, please check whether your charger or power bank supports the required load power supply level to avoid wasting your time

When replacing different connector ports, please cut off the power supply

Generally, there are output specifications on the back or bottom of the charging head. The USB-PD charger needs to support 5V, 9V, 12V, 15V, and 20V output to use the corresponding voltage specifications

 

 Does not support bi-directional charging,Type-C input,DC output

Note:

The USB C to DC decoy cable must be used with a charger or mobile power supply that supports one of the PD protocols, otherwise it can only output 5V.

Before purchasing, please check whether your charger or power bank supports the required load power supply level to avoid wasting your time

When replacing different connector ports, please cut off the power supply

Generally, there are output specifications on the back or bottom of the charging head. The USB-PD charger needs to support 5V, 9V, 12V, 15V, and 20V output to use the corresponding voltage specifications